К основному контенту

supermicro ipmi

There are AMI and ATEN, there are also X8 and X9 motherboards. You need to determine first if you are using X8 or X9 motherboard. Then determine if it's using ATEN or AMI firmware. Here is the list of Raw commands to set the LAN mode:

X8 ATEN
to get lan mode
ipmicfg -raw 0x30 0x70 0x0c 0
to set lan mode dedicated
ipmicfg -raw 0x30 0x70 0x0c 1 1 0
to set lan mode onboard/shared
ipmicfg -raw 0x30 0x70 0x0c 1 1 1
to set lan mode failover
ipmicfg -raw 0x30 0x70 0x0c 1 1 2

X9 ATEN
to get lan mode
ipmicfg -raw 0x30 0x70 0x0c 0 0
to set lan mode dedicated
ipmicfg -raw 0x30 0x70 0x0c 1 0
to set lan mode onboard/shared
ipmicfg -raw 0x30 0x70 0x0c 1 1
to set lan mode failover
ipmicfg -raw 0x30 0x70 0x0c 1 2

X8 AMI
to get lan mode
ipmicfg -raw 0x30 0x70 0x0c 0 0 1
to set lan mode dedicated
ipmicfg -raw 0x30 0x70 0x0c 1 1 0
to set lan mode onboard/shared
ipmicfg -raw 0x30 0x70 0x0c 1 1 1
to set lan mode failover
ipmicfg -raw 0x30 0x70 0x0c 1 0

X9 AMI
to get lan mode
ipmicfg -raw 0x30 0x70 0x0c 0
to set lan mode dedicated
ipmicfg -raw 0x30 0x70 0x0c 1 0
to set lan mode onboard/shared
ipmicfg -raw 0x30 0x70 0x0c 1 1
to set lan mode failover
ipmicfg -raw 0x30 0x70 0x0c 1 2

Комментарии

Отправить комментарий

Популярные сообщения из этого блога

How to do Arithmetic Operations in Ansible

You can use arithmetic calculations in Ansible using the Jinja syntax. This is helpful in many situations where you have stored the output of an operation, and you need to manipulate that value. All usual operation like addition, subtraction, multiplication, division, and modulo are possible. Let us start with an example. We will be using the  debug module  to print the out the result. The following tasks show all the basic arithmetic operations. The output is given in comments. Ansible arithmetic operation example - hosts: loc tasks: - debug: msg: "addition{{ 4 +3 }}" #Ansible addition 7 - debug: msg: "substraction {{ 4 - 3 }}" #Ansible arithmetic substraction 1 - debug: msg: "multiplication {{ 4 * 3 }}" #multiplication 12 - debug: msg: "Modulo operation {{ 7 % 4}}" #ansible Modulo operation - find remainder 3 - debug: msg: "floating division {{ 4 / 3}}" #ansible floating divisio...
Отправить комментарий
Далее...

ubuntu/debian ipmi

#install ipmitool (this is for debian) apt-get install ipmitool #insert the kernel modules needed for ipmi modprobe ipmi_devintf modprobe ipmi_si modprobe ipmi_msghandler #get the current mode (01 00 is dedicated mode) ipmitool raw 0x30 0x70 0x0c 0 #send the raw command to enable dedicated lan ipmitool raw 0x30 0x70 0xc 1 1 0
Отправить комментарий
Далее...
Ansible - Appending to lists and dictionaries  n this blog post I'll show how to add items to lists and dictionaries, when using loops, and across tasks. Normally when trying to add a new item to the variable, while in the loop, or between tasks, Ansible will ovewrite the values, keeping the result of the last iteration. For example, let's see what will be the result of running the following playbook: --- - name: Append to list hosts: localhost vars: cisco: - CiscoRouter01 - CiscoRouter02 - CiscoRouter03 - CiscoSwitch01 arista: - AristaSwitch01 - AristaSwitch02 - AristaSwitch03 tasks: - name: Add Cisco and Airsta devices to the list set_fact: devices: "{{ item }}" with_items: - "{{ cisco }}" - "{{ arista }}" - name: Debug list debug: var: devices verbosity: 0 [przemek@quasar blog]$ ansible-playbook append_list.yml PLAY [Append to list] ****************...
Отправить комментарий
Далее...